Hoopside

Formats

What is an XXX embroidery file, and why does Singer use it?

An .xxx file is a machine-embroidery design in Singer’s format: a short header, the stitches, and a table of colours with no names attached. If you own a Singer and your design arrived as a DST, converting is how you get one.

What is an XXX embroidery file?

An XXX embroidery file is a machine-embroidery design in Singer’s stitch format. It holds needle instructions — stitch here, jump to there, trim, stop for a colour change — each one a small movement measured in tenths of a millimetre, followed by a short table of colours. It is not an image, which is why your phone’s gallery ignores it.

Hoopside reads XXX designs on Android and draws them the way they will stitch, with the real size in millimetres, the stitch count and the numbered colour stops. Opening a design is free.

Which machines use XXX files?

Singer’s. The format comes out of the Compucon software behind Singer’s embroidery line, which is why the file directories still list .xxx under “Compucon Singer”, with a MIME type to match — about as much provenance as any public source gives it. Among home machines it is the Singer Futura family that the retailer pages and machine-format guides name for XXX; as of October 2026 that is what more than one source agrees on, and your machine’s manual is the only authority on what it will actually accept.

Not every Singer wants an XXX

The format lists published by embroidery-software makers put .csd next to .xxx under Singer, for a different generation of machines. Hoopside does not read CSD. It reads DST, EXP, XXX, VP3, PEC, PES and JEF, and nothing else. If your manual asks for a format that is not on that list, this is not the app for that file, and renaming it will not make it one.

What an XXX file stores, and what it leaves out

Three parts, in this order: a 256-byte header, the stitch block, and a colour table.

The header has room for the number of stitches, the number of colours and the design’s measurements. Hoopside does not take those on trust — it replays every stitch and measures the result, so the size you see is the design’s real size rather than whatever was written into a header field.

Then the stitches, from byte 256 onward. An ordinary stitch is two signed bytes: a step in x and a step in y from wherever the needle already is. A leading 0x7F marks the exceptions — a jump, a trim, a colour change — 0x7D and 0x7E introduce a long move with two-byte coordinates, and a pair of 0x7F bytes ends the design.

After that, the colour table: one four-byte entry per colour, most significant byte first. And that is the whole file.

FormatWhat the file itself can tell you about colour
DST, EXPNothing — no colour data at all
XXXThe colour values, with no names
PES, JEFColours, and often a thread name or catalogue reference

Why an XXX design shows colours but no thread names

Because a colour entry in an XXX is a colour and nothing else: a byte each of red, green and blue. The file has no field for a brand or a shade number, so a viewer has nothing to print even when the design was stitched out from named spools.

What Hoopside shows for an XXX, and what it will not

Each colour stop, numbered in stitching order, in the colour the file really carried, with the stitch count for that block. The name is left blank rather than guessed: a code the design never held would send you to the shop for the wrong spool.

So an XXX is better off than a DST, which arrives with no colours at all and has to be drawn in stand-ins, and worse off than a PES, which can carry the names as well.

If you want the stops on paper before you thread up, the printable thread chart lays out the swatches, the stop numbers and the stitch counts; it is part of the same one-time unlock as converting.

How to open an XXX file on your phone

  1. If the design arrived as a zip, extract it with your phone’s file manager first, then look for the .xxx inside.
  2. Install an app that reads XXX. Hoopside does, along with PES, DST, JEF, EXP, VP3 and PEC, and viewing is free.
  3. Pick the file in the app, or send it there with Open with from Downloads, Drive or a file manager.

A renamed XXX is often still recognisable. XXX has no signature in its opening bytes, so the file name is the first thing Hoopside trusts — but the format does have a header, and when the name is gone the shape of that header is checked instead: the file has to be larger than its 256-byte header, and the stitch and colour counts inside it have to be plausible. That is a fallback the EXP format cannot offer, because an EXP has no header to check at all. Treat it as a rescue, not a reason to strip the extension.

Converting a DST or PES to XXX for a Singer

Most designs are sold in DST and some in PES, so a Singer owner converts more often than most. Converting means re-encoding every stitch for the target format, never renaming the file; what a real conversion does applies here in exactly the same way.

What makes XXX a comfortable target is its ceiling. One XXX command can travel ±124 units, which is 12.4 mm. A DST command stops at ±121, just inside that, so a DST converted to XXX never needs a stitch split. A PES design is the opposite case: its commands may reach ±2047 units, so the long ones have to be rewritten as runs of legal steps that land the needle in the same places.

Colour behaves the way the formats allow. Converting a DST to XXX fills the colour table with stand-ins — each block distinct from the ones either side of it, so you can still count the stops — because the DST never recorded what the colours were. Converting a PES to XXX keeps the colour values and loses the names, since an XXX has nowhere to put them. The colour stops themselves survive in both directions, which is the part that matters at the machine: it still pauses in the right places, the same number of times.

In Hoopside, converting a design to another machine’s format — including to and from XXX — is a one-time unlock; opening and reading every design stays free. Every format pair is cross-checked against pyembroidery’s own conversion of the same source before a release ships: 245 files, 0 failing.

If the machine still refuses it

An XXX that opens correctly on the phone and still will not load is telling you about something other than the format. It is one of six reasons a machine rejects a design, and the rest — a truncated download, the wrong folder on the stick, a design wider than the hoop, more stitches than the machine will take — are all visible before you walk over to the machine.

Keep the original. Convert to a new file rather than over the top of what you bought. If the Singer ever refuses the converted version you want the source to try again from, and if you later own a different machine you will want it again.

Related

Convert a design for a Singer, on the phone

Hoopside converts a design to DST, PES, JEF, VP3, EXP or XXX, re-encoding the stitches for the format you pick rather than just renaming the file. Viewing every design is free; converting is a one-time unlock.

Get Hoopside on Google Play