Hoopside

Formats

What is an EXP embroidery file?

An .exp file is one of the leanest formats in machine embroidery: stitches and nothing else. That is why it opens in colours nobody chose, and why the file name matters more here than for any other format.

What is an EXP embroidery file?

An EXP embroidery file is a machine-embroidery design in Melco’s format, also used by Bernina machines. It holds needle instructions and nothing else — stitch here, jump to there, trim, stop for a colour change — each one stored as a movement in tenths of a millimetre. It is not an image, and it carries no thread colours of its own.

Hoopside reads EXP designs on Android and draws them the way they will stitch, with the real size in millimetres, the stitch count and the numbered colour stops. Opening a design is free.

Which machines use EXP files?

Two different worlds, which is the root of most EXP confusion.

Melco is a commercial embroidery machine maker, and EXP is its stitch format — the kind of file a production shop hands over. Bernina home machines also take EXP designs, which is why the extension turns up in the downloads of people who have never been near a commercial machine. Format references and Bernina’s own support guides name the 830, 780 and 580 among the models that read EXP, and the list is longer than that; as of October 2026 those are the ones more than one source agrees on. Your machine’s manual is the only authority on what it actually accepts.

Melco EXP and Bernina USB EXP are not the same thing

This is the part the file-extension directories leave out, and it explains nearly every “my EXP design lost its colours” question.

What you haveWhat it isThread colours
Melco EXPOne .exp file — the commercial formatNone in the file
Bernina USB EXPThree files: .exp, .inf, .bmpIn the .inf, not the .exp

In the Bernina arrangement the .exp still holds only the stitches. The sidecar .inf holds the thread colours and the .bmp is the small preview the machine shows on its screen. Bernina’s own documentation and the shops that sell designs for these machines say the same thing, and both warn about the consequence: copy only the .exp to your USB stick and the machine shows the design in standard colours instead of the intended ones. Copy all three files together.

The wider lesson is that EXP is not alone in this. Several machine formats keep their colours in a companion file rather than in the design, which is why a palette can go missing in transit while every stitch arrives intact.

Why your EXP design opens in the wrong colours

Because the colours were never in the file. Any viewer showing you an EXP has to put something on screen, so it picks a palette of its own. The same thing happens with DST, for the same reason — see why a DST design has no colours.

What Hoopside does here, and what it will not do

It gives each colour block a stand-in colour, distinct from the blocks either side of it, so you can tell them apart and count them. Those colours are arbitrary: the file never said what thread to use, and Hoopside will not print a catalogue number a design did not carry.

It reads the .exp — the stitches. It does not read a companion .inf, so a Bernina USB EXP opens in stand-in colours here even when the .inf is sitting in the same folder.

What is real is the number of stops. A colour change is an instruction inside the stitch data, so a five-colour EXP still stops five times, in the right places. Count the stops, choose your own threads, and write the pairing down before you start.

How an EXP file stores a stitch

An ordinary stitch is two bytes: a small step in x and a small step in y, relative to where the needle already is. A leading byte of 0x80 marks the exceptions — a jump, a trim, a colour change, or a stitch written the long way. That is the whole format.

Two consequences follow from how small those steps are. A single EXP command can travel at most ±127 units, which is 12.7 mm; anything longer has to be written as several commands along the same path. And because the file has no header, it does not state its own size, stitch count or colour count anywhere. Those figures only exist once something has replayed every stitch and measured the result — which is exactly what a viewer does, and what reading a design before you stitch is about.

How to open an EXP file on your phone

  1. If the design arrived as a zip, extract it first with your phone’s file manager, then look for the .exp inside.
  2. Install an app that reads EXP. Hoopside does, along with PES, DST, JEF, VP3, XXX and PEC, and viewing is free.
  3. Pick the file in the app, or send it there with Open with from Downloads, Drive or a file manager.

Keep the .exp on the end of the name. Most formats start with a signature in their first few bytes — #PES, %vsm%, LA: — so software can recognise them whatever they are called. EXP has no header at all, so there is no signature to find. The extension is genuinely the only clue, and a design that came through a messaging app with its name rewritten may need the .exp put back by hand before anything will touch it.

If the file opens on the phone but the machine still refuses it, the format is only one of several possible causes — the six reasons a machine rejects a design are worth walking in order.

Converting an EXP file, or converting to EXP

Converting means re-encoding every stitch, never renaming the file, and the 12.7 mm ceiling is why. A PES design may contain a single command travelling up to ±2047 units, so going from PES to EXP has to split the long ones into runs of legal steps that land the needle in the same places. Going the other way, EXP to PES, never needs a split, because every EXP command already fits. The mechanics are the same in both directions: what a real conversion does.

Colour does not survive a conversion it never had. Converting an EXP to PES produces a file with a thread table, but its colours are stand-ins — the EXP had nowhere to record the real ones. Converting a design to another machine’s format in Hoopside, including to and from EXP, is part of a one-time unlock; opening and reading every design is free.

Related

Open an EXP design and read its real figures

Hoopside opens PES, DST, JEF, EXP, VP3, XXX and PEC designs on Android and shows each one the way it will stitch — real size, stitch count, numbered colour stops and the thread list. Viewing is free, with no ads and no account, and nothing leaves your phone.

Get Hoopside on Google Play